AIJ Engineering Consulting - AIJ Enginnering Consulting LLC: We are a small Engineering firm with over 25 years of experience.

Sales Team aij-sales@aijengconsulting.com
General enquiries office@aijengconsulting.com

Who are we

together we can create the future

ABOUT COMPANY

AIJ Engineering Consulting LLC

We are a small Engineering firm with over 25 years of experience.

  • Developed new Water Treatment Technologies based on using Ozone and UV Light
  • Developed a new technology for the Winding of Ultra High Voltage Power Transformers and Autotransformers with HV > 200KV and S > 250MVA
  • Project Management in Water Treatment System and Robotized Paint Automation Systems
  • Proved in 2002 for the first time in the world that is possible to increase the speed of a robot while spraying powder from 250 mm/sec to 700 mm/sec
  • Consulting in Electrical Safety and Specially in Arc Flash Hazard Analysis
  • Consulting in New Solar Power Systems with efficiencies > 50% compared with the current solar panels with efficiencies max 21%
  • Consulting in Concentrating / Storage Solar Systems reaching temperature up to 3000 degrees Celsius
  • In the last quarter of 2020, we have established a partnership with AJGS Automation LLC.

AIJ Engineering Consulting LLC

Our History

Filtration System for the 100,000.00 gal/day potable Water Treatment Plant

1995

The most important application of WTS Technologies is in Potable Water, Commercial Water and Industrial Water
slider-2-img-02-new5.jpg

Shielding in Windings

1998

Developed a new technology for the Winding of Ultra Hight Voltage Power Transformers and Autotransformers with HV > 200KV and S > 250 MVA.
This technology called ``Shielding in Windings`` is applied in production since 1998.

Arc Flash Hazard Analysis

AFHA

Below are some of the Customers for which AFHA was done

Increase the speed of a robot while spraying powder

2002

Proved in 2002 for the first time in the world what is possible to increase the speed of a robot while spraying powder from 250 mm/sec to 700 mm/sec.

As a consequence, the number of robots required to fulfil the Fillm Build Requirements was reduces by aproximate 33%. The booth lenght was reduced, the Air House required was reduced, the conveyor lenght was reduced, the energy required to do the temperature and humidity close loop regulation was reduced accordingly.

Kobelco Robot dressed up for delivery at Plastic Omnium, Anderson, South Carolina to paint fascia for GM Alero and BMW

Project Management Jobs

2014 - 2016

Project Management in Water Treatment System and Robotized Paint Automation Systems

A whole new line of products was created. Starting with:

  1. Replacement of Venturi based powder Technology where the Powder Particles speed was approx. 125 m/sec with Dense Phase Technology with Powder Particles speed 5m/sec.
  2. The powder applicator capable of delivering 0-1000 g/min with the best linear result between 50 g/min and 800 g/min
  3. The Dense Phase Powder Transfer with cross over.